Inhoudsopgave
Advertenties
2. Remove the blade bolt.
3. Remove the blade.
4. Examine the blade support and blade bolt to see if
there are damages.
5. Examine the motor shaft to make sure that it is not
bent.
6. When you attach the new blade, point the angled
ends of the blade in the direction of the cutting cover.
(Fig. 41)
7. Make sure that the blade is aligned with the center of
the motor shaft.
8. Lock the blade with a block of wood. Attach the
spring washer and tighten the bolt and washer with a
torque of 23-28 Nm. (Fig. 42)
Battery
LED on the battery
The green LED flashes.
The battery error LED
flashes.
The battery error LED
comes on.
Battery charger
LED on the battery
charger
The error LED flashes
or comes on.
Lawn mower
The warning indicator (error LED) is found below the
battery lid.
1574 - 011 - 22.08.2023
Troubleshooting
Cause
The battery voltage is
low.
The battery is too cold
or too hot to use.
The battery is empty.
There is a permanent
battery error.
Cause
The battery charger is
too cold or too hot to
use.
Other errors.
9. Pull the blade around by hand and make sure that it
turns freely.
WARNING:
The blade is very sharp and cuts can
easily occur.
10. Start the product to do a test of the blade. If the
blade is not correctly attached, there is vibration in
the product or the cutting result is unsatisfactory.
Solution
Charge the battery. Refer to
Let the battery cool down or move it indoors to warm it up.
When the battery has the correct temperature, it can be used
again. Use the battery in the product only when the ambient
temperature is 5 °C–40 °C.
Charge the battery. Refer to
Speak to your Husqvarna servicing dealer.
Solution
Let the battery charger cool down or move it indoors to warm
it up. When the battery charger has the correct temperature, it
can be used again. Use the battery charger when the ambient
temperature is 5 °C–40 °C.
Speak to your Husqvarna servicing dealer.
Use heavy duty gloves.
To charge the battery on page 14 .
To charge the battery on page 14 .
17
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
