Inhoudsopgave
Advertenties
Cable switching for LoupeLight 2 and MicroLight 2
Switch the mPack mini off by turning the controller to the zero position. Open and/or
remove all cable holders such that the cable is exposed. Disconnect the plug on the
mPack mini and unlock the plug on the light. Connect the new cable to the light and
the mPack mini. Attach the cable to the light.
General Warnings
Check the correct operation of the device before use! Do not use the device if there
are visible signs of damage.
Do not use the device in fire- or explosive risk area (e.g. oxygen saturated or
anesthetic environments)
Do not modify the device.
Use only original HEINE parts, spare parts, accessories and power sources.
The device and its accessories are not sterile. Avoid touching with sterile hands,
areas or instruments.
Danger from loose, falling parts. Please check before every use that all the parts
are tightened safely.
Route the supply cable in such a way that nobody can trip over it.
Do not shine the light directly into the eyes. Never ever hold magnifying glasses or
any other optical system in front of the light of the LED-headlight.
Only use the lens protector as transport protection. Store the lens protector in the
transport case. Do not use in the surgical rooms.
Note the operating time of the power source. You may want to have a charged spare
power source ready for use.
Jerky, fast movements can alter the position of the lamp housing.
General Notes
The warranty for the entire product is invalidated if non-genuine HEINE products or
non-original parts are used and if repairs or modifications are made to the device by
persons not authorized by HEINE. For more information, please visit www.heine.com.
Store and use the device in dry and dust-free environments only!
Disposal
The product must be recycled as separated electrical and electronic devices. Please
observe the relevant state-specific disposal regulations.
Electromagnetic Compatibility
Medical electric devices are subject to special precautionary measures with regard to
electromagnetic compatibility (EMC). Portable and mobile high frequency communication
equipment can affect medical electric devices.
This is a device in the domestic environment, this device may cause radio interference,
so that it may be necessary in this case, to take appropriate remedial measures, as
e.g. orientation, new arrangement or shielding of the device or restrict the connection
to the site.
The use of accessories, converters or cables other than the ones specified by
HEINE might lead to increased emission reduced electrical immunity of the medical
equipment.
The device may not be stacked directly near or used directly beside other devices.
If the device is to be operated in a stack or with other devices, the device should be
watched to ensure it operates properly in this location.
The appendix contains the tables „Guidance and Manufacturer's declaration –
Electromagnetic immunity", technical specification and an explanation of the used
symbols.
14/76
MED 113192
2017-01-19
Advertenties
Inhoudsopgave
