Inhoudsopgave
Advertenties
Operation
ML4 LED
To set up the ML4 LED with mPack or EN50, connect the short cord from the brightness
control with the connecting cord mPack UNPLUGGED/Cinch and fix this to the back part
of the headband (Fig. 8). Connect the instrument to the Cinch-socket of the mPack or
EN 50. The rheostat (1) (Fig. 6) is used to adjust the brightness and to turn the device
on and off.
Fig. 8
To use the ML4 LED with the mPack UNPLUGGED first remove the rear cover of the
headband (Fig. 9).
Fig. 9
Then attach the mPack UNPLUGGED to the rear of the headband. To do so, hold the
headband in your left hand and push the mPack UNPLUGGED to the left, until it clicks
into place (Fig.10).
Fig. 10
Selecting viewing angle and field of view (Fig. 4)
Without S-Guard
After loosening the locking screw (4), the light head can inclined and the angle of the light
direction can be adjusted.
After adjustment, re-tighten the screw (4).
11/76
MED 113192
2017-01-19
Advertenties
Inhoudsopgave
