Inhoudsopgave
Advertenties
When selecting the mounting location, pay attention to
the following:
Make sure that the product illuminates the desired area
(a height of 1.5–2.5 m is ideal).
Make sure the twilight sensor
bottom of lamp body
at night by street lighting or garden light. This can in-
fluence its functioning.
Remove the fixing screws
visible on the lamp body
the connection housing
block
12
stallation (see fig. B / 2).
Use the holes in the connection housing
intended for the mounting screws
holes (see fig. C).
Now drill the fixing holes (dia. approx. 6 mm, depth
approx. 40 mm). Ensure that you do not damage the
electrical supply line.
Now place the wall plugs
(see fig. D).
Slide the mains connection lead
entry with the membrane
Fasten the connection housing with the supplied silicone
rings
and mounting screws
10
Connect the connection cable of the product to the
mains connection lead
block
12
Also ensure that the colour connection of the wires is
correct when connecting (L = black or brown, N = blue
or white).
20 GB/IE
2
from the connection housing
11
(see fig. F / 1).
, which located at the
13
(see fig. I), is not illuminated
and silicone washers
3
(see fig. B / 1), and open
2
. Then take out the terminal
5
, to mark the drill
9
into the drill holes
8
through the cable
11
.
6
(see fig. E).
9
by means of the terminal
4
for easy in-
5
, which are
5
Advertenties
Hoofdstukken
Inhoudsopgave
