17.8
Vacuuming of canisters
1. Remove the sealing bar from the device by pulling it upwards.
4. Press Vacuum/Seal for 3
seconds. Briefly press down
the lid of canister. The
canister will automatically. be
vacuumed.
5. The device beeps when the
operation is completed.
6. Then remove the adapter
from the connector at the
vacuum chamber and replace
the air filter. Replace the
sealing bar.
17.9 Marinate
and the indicator lamp Vacuum & Seal and Seal are flashing
for a few seconds then they turn off. Lift up the handle. Open
the lid.
For best marinate results repeat this process 2-3 times. After each operation stir the food
with a spoon. Lift up the handle. Open the lid and take out the canister.
2.
Remove the air filter above the connector for the vacuum hose
and place the adapter.
3.
Place the food into the canister. Place the lid of canister.
Connect the vacuum hose at lid of canister and with adapter at the
connector at the vacuum chamber of the device.
Place the food that you want to marinate into the vacuum canister.
Lift up the handle.
Open the lid of the device and place the canister without lid into the
vacuum chamber. Close the lid of the device and press marinate.
After starting of marinate process press
down the lid at the handle for 2 seconds.
The vacuum time is counted down to 0
46