Advertenties
1. PROPER USE OF THE PRODUCT
The battery maintenance device is designed to ensure that the vehicle battery remains fully charged when the vehicle is not used for a longer
period of time. The battery maintenance devices is suitable for the following lead-acid batteries:
• Wet batteries (WET), lead-acid batteries (fluid electrolyte)
• Gel batteries (gel electrolyte)
• AGM batteries (electrolyte in fibreglass fleece)
• Maintenance-free lead-acid batteries (MF)
Other batteries may not be charged with this device.
The battery maintenance device may not be used as jump-start assistance. First charge the battery of the vehicle completely and remove the
charger before starting the vehicle.
The battery maintenance device may not be used as direct current source or for other purposes.
The battery maintenance device is designed for use in a protected environment at temperatures of -15 °C to +40°C.
This device is not designed to be used by children and people with limited mental capacities or those without experience and/or knowledge.
Keep children away from the device.
The device is not designated for commercial use.
Utilisation according to the intended purpose also includes the observance of all information in these operating instructions, particularly the ob-
servance of the safety instructions. Any other utilisation is considered to be contrary to the intended purpose and may lead to material damages
or personal injuries. EAL GmbH assumes no liability for damage resulting from improper use.
2. SCOPE OF DELIVERY
· Battery maintenance device
3. SPECIFICATIONS
Battery voltage:
12 V
Charge current:
500 mA
Output:
12 Volt DC, 500 mA
Long charger cable:
Approximately 1.00 m
4. EXPLANATION OF SYMBOLS
Complies with
EC directives
Protective
insulation
housing (safety class II)
Fail-safe safety transformer
Output voltage to maximum 50 Volt
F
5. SAFETY NOTES
•
The warning triangle labels all instructions important to safety. Always follow these otherwise you could injure yourself
or damage the device.
•
Only connect the device to a power socket installed according to regulations. The voltage must correspond to the specifi-
cation on the type plate of the device.
•
Do not trap the power cable and protect it from sharp edges, damp, heat or oil. The power cable of the unit cannot be
replaced. In the event that the cable is damaged, the unit must be disposed of.
•
Do not operate the device or immediately pull the plug if it is damaged or you suspect it may be defective. In this case,
contact our technicians.
•
Pull the plug when the device is not in use.
•
Keep packaging materials, especially plastic and plastic bags, away from children. Risk of suffocation.
•
Remove all plastic from the device before use.
•
Place the mains cable in such a manner that it does not impede and that it cannot be unplugged accidentally.
•
Disconnect the battery charger from the power supply after the charging process.
•
Keep the charger in a place that cannot be accessed by children or unauthorised persons.
•
Never operate the device in the vicinity of flammable materials or in an environment prone to explosion.
•
Do not cover the charger as this may lead to overheating and thus damage to the device. Never set the charger up for
· Operating instructions
Battery capacity:
Input:
Long mains cable:
Weight:
Labelled electrical products may not be
disposed of in the household waste
130 °C
Fuse, switches off at 130 °C
5 – 50 Ah
230 Volt AC, 50 Hz, 14 W
Approximately 1.05 m
0.330 kg
Devices with this symbol may only
be operated in the house (dry en-
viroment)
Read the operating instructions
Protection against ingress of
foreign bodies ø > 12 mm
5
Advertenties
Hoofdstukken
