Advertenties
Batteries: removal
tion devices (gloves, goggles, overalls, safety shoes, etc.) to reduce the risk of injury. Make
and do not smoke. Proceed as follows.
Disconnect the battery cables and bridge terminals from the battery poles.
Lift the batteries from the compartment using suitable lifting equipment.
Make sure the battery charger is compatible with the batteries to be charged.
Tubular lead batteries: an automatic charger is recommended. Consult the battery charger manu-
supplied with the machine.
The connector supplied for the external battery charger is suitable for cables with a minimum cross-
2
section of 16 mm
.
Remove about 13 mm of protective sheath from the red and black cables of the battery charger.
Insert the wires into the connector contacts and squeeze them forcefully with suitable pliers.
Respect the polarity (red wire + black wire –) when inserting the wires into the connector.
! DANGER!
! DANGER
circuit.
EN
-
16
Advertenties
