Screensaver - Weller WX1 Gebruiksaanwijzing
Verberg thumbnails
Zie ook voor WX1:
- Gebruiksaanwijzing (51 pagina's) ,
- Gebruiksaanwijzing (120 pagina's) ,
- Vertaling van de oorspronkelijke gebruiksaanwijzing (251 pagina's)
Inhoudsopgave
Advertenties
Parameter menu
Screen saver
Screen saver
Robot output
34
All manuals and user guides at all-guides.com
Option
Description
ON
ON
OFF
OFF
The robot output is on the back of the device.
The following options are available::
WX1: Off – On – ZeroSmog – Stop&Go
WX2/ WXD2: Off – left – right – left & right – ZeroSmog – Stop&Go
Option
Description
left
left tool channel (factory setting)
right
right tool channel
left & right
both tool channels
ZeroSmog
The rear floating signal output is closed when
using a tool. Certain Zero Smog can be connected
with an optional adapter. The rear RS 232 port is
still functional.
Signal output is open in Standby, Off and Auto Off
modes or if no tool is inserted.
Stop&Go
The rear RS232 port is used to drive an optotrans-
mitter so that a KHE-P can be activated via an
optical fibre.
If a tool is used, the output is set to High in order
to „activate" the transmitter. In addition, the floating
switched output is closed. Output is off in Standby,
Off and Auto Off modes or if no tool is inserted.
Note
If the robot is at working temperature, the display will show – ok –.
(Not available with Zero Smog)
Open Menu
Station parameters 2
Open Menu
Station parameters 2
Advertenties
Inhoudsopgave
