Advertenties
SilverCrest SSPM 6 A1
7.2 Using the mill
•
Remove the protective cap (7) on the bottom of the container (6).
•
Keep the button (2) pressed to activate the mill. The light (8) lights up during operation.
•
Replace the protective cap (7) onto the bottom of the container (6) after use.
7.3 Changing the grind setting
•
Remove the protective cap (7) on the bottom of the container (6).
•
Turn the adjusting screw (9) anti-clockwise slightly for a coarser grind setting.
•
Turn the adjusting screw (9) clockwise slightly for a finer grind setting.
•
Replace the protective cap (7) onto the bottom of the container (6).
Under some circumstances, hard peppercorns can block the mill's grinding mechanism.
Grains of salt can also block the grinding mechanism because they absorb moisture or
have different levels of hardness. If this happens, turn the mill upside-down and press the
button (2) to release the pepper or salt from the grinding mechanism. If necessary, you
can also shake the mill gently as you do so to help release the blockage.
8. Cleaning
WARNING of damage to property
Do not use any scratching or abrasive cleaning agents or abrasive objects (such as a
metal scourer) for cleaning purposes. Otherwise the mill may be damaged.
Do not clean the mill and its accessories in the dishwasher, as this may cause
irreparable damage.
Never immerse the mill in water or any other liquid. No liquid may enter the mill.
•
Clean the housing of the mill with a soft, damp cloth, using a mild detergent for stubborn stains.
•
Dry all of the parts thoroughly.
•
It is not necessary to clean the grinder and the container (6).
9. Storing the device when not in use
If the mill is not going to be used for a longer period of time, store it in a safe, clean and dry place.
•
Remove the batteries.
•
Empty the container (6).
•
Before storing the mill, clean it thoroughly as described in the previous section.
8 - English
Advertenties
