Advertenties
▶
Do not touch the battery poles with your fingers, tools, jewelry, or other electrically conductive
objects. This can damage the battery and also cause material damage and personal injury.
▶
Keep batteries away from rain, moisture and liquids. Penetrating moisture can cause short circuits,
electric shock, burns, fire and explosions.
▶
Use only chargers and power tools approved for the specific battery type. Read and follow the
relevant operating instructions.
▶
Do not use or store the battery in explosive environments.
▶
If the battery is too hot to touch, it may be defective. Put the battery in a place where it is clearly
visible and where there is no risk of fire, at an adequate distance from flammable materials. Allow
the battery to cool down. If it is still too hot to touch after an hour, the battery is faulty. Consult Hilti
Service or read the document entitled "Instructions on safety and use for Hilti Li-ion batteries".
Observe the special guidelines applicable to the transport, storage and use of lithium-ion
batteries.
Read the instructions on safety and use of Hilti Li-ion batteries that you can access by
scanning the QR code at the end of these operating instructions.
Description
1
Product overview
Lockable on/off switch
@
Grip
;
Adjusting knob for speed
=
Battery status indicator
%
Battery release button
&
Battery
(
Dust filter
)
Indexing pin
+
Die carrier
§
Intended use
The product described is a hand-held cordless nibbler. It is designed for cutting sheet-like workpieces
out of punchable materials such as steel, aluminum, non-ferrous metal and plastic, for nibbling
straight or curved outside edges and cut-outs and for nibbling along marked lines of cut. The nibbling
process produces distortion-free cut edges. Other applications are possible as well, depending on
the accessory tool used.
SPN-CN: This accessory tool is also designed for cutting pipes, nibbling corrugated metal and
nibbling with a template. The hollow round punch enables the nibbler to be rotated about its own
axis so that nibbling can proceed in any direction.
SPN-RN and SPN-RL: These accessory tools are also designed for cutting sheet metal profiles such
as trapezoidal sheet metal, corrugated sheet metal, box-section sheet metal and angled moldings.
• For this product, use only Hilti Nuron lithium-ion batteries of the B 22 series. For optimum
performance, Hilti recommends the batteries stated in the table at the end of these operating
instructions for this product.
• For these batteries, use only Hilti chargers of the type series stated in the table at the end of these
operating instructions.
Items supplied
Nibbler, Torx wrench, operating instructions
*2327535*
30
2327535
Securing screws
/
Die
:
Cover ring
∙
Punch
$
Punch guide
£
Casing
|
Accessory tool, SPN-CN
¡
Accessory tool, SPN-RN
Q
Accessory tool, SPN-RL
W
22
Advertenties
