Advertenties
Technical data
Engine
Brand
Model
Engine type
3
Displacement, cm
Speed, rpm
Nominal engine output, kW
Ignition system
Spark plug
Electrode gap, mm
Fuel and lubrication system
Engine lubrication type
Fuel tank capacity, l
Oil tank capacity, l
2
Engine oil
Weight
With empty tanks, kg
3
Noise emissions
Sound power level, measured dB (A)
Sound power level, guaranteed L
1
The power rating of the engine indicated is the average net output (at specified rpm) of a typical production
engine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ
from this value. Actual power output for the engine installed on the final product will depend on the operating
speed, environmental conditions and other values.
2
Use engine oil of quality SF, SG, SH, SJ or higher. If SAE-30 oil is used at temperature lower than +5 °C,
there is a risk that it does not lubricate the engine sufficiently. This can cause engine damage. Refer to
replace the engine oil on page 16 for the correct oil for low temperatures. Refer to the viscosity chart in the
engine manual (If included) and select the best viscosity based on the expected outside temperature.
3
Noise emissions in the environment measured as sound power (L
2000/14/EC.
18
Technical data
LC 551SP
Kawasaki
FJ180V
Single cylinder, 4-
Stroke, Forced Air
Cooling, OHV
179
2800
1
2.9
NGK BPR5ES
0.6–0.8
Pressure with Oilfilter Pressure with Oilfilter Splash
1.9
0.7
Husqvarna SAE30,
Husqvarna SAE
5W-30 Synthetic,
Husqvarna SAE
10W-40
48.5
97
dB (A)
98
WA
LC 551VBP
Kawasaki
FJ180V
Single cylinder, 4-
Stroke, Forced Air
Cooling, OHV
179
2800
2.9
NGK BPR5ES
0.6–0.8
1.9
0.7
Husqvarna SAE30,
Husqvarna SAE
5W-30 Synthetic,
Husqvarna SAE
10W-40
52.5
96
98
) in conformity with EC directive
WA
LC 551VQ
Husqvarna
HS 166AP
Single cylinder, 4-
Stroke, Forced Air
Cooling, OHV
166
2800
2.7
Husqvarna HQT-7
0.7-0.8
1.5
0.5
Husqvarna SAE30,
Husqvarna SAE
5W-30 Synthetic,
Husqvarna SAE
10W-40
51.0
97
98
To
1906 - 007 -
Advertenties
