Inhoudsopgave
Advertenties
Optimization choice
The OPTI COMFORT mode is activated by default.
OPTI
The word
will appear briefl y on the display then it will alternate
CONF
ECO
with the set mode
,
1- Press
or
.
CONF
= Optimisation feature activated for OPTI COMFORT mode,
priority to comfort.
ECO
= Optimisation feature activated for OPTI ECO mode, priority
to energy effi ciency.
OFF
= Optimisation feature disactivated.
2- To save and move automatically to the next setting, press
exit the user settings, press
PIN CODE LOCK
Overview
Your heating device is protected by a safety code against nonauthorised
use. The PIN code (Personal Identity Number) is a
customisable 4 numbers code. When enabled, it prevents access to the
following settings:
- Selecting the Comfort mode : The access to the Comfort mode is
forbidden, only the Auto, Eco and Frost protection modes are available.
- Minimum and maximum Limits of the setting temperature range (the
Comfort temperature modifi cation is forbidden out of the authorised
setting range).
- Programming mode.
- Open window detection settings.
- Setting the Eco mode temperature lowering-level.
- Setting the Frost protection temperature.
In addition to the version with occupancy detector:
- Occupancy detection settings.
- Optimization choice.
3 important steps are needed for the fi rst use of the PIN code lock:
1 - PIN code initialisation, enter the preset PIN code (0000) to access to
the feature.
2 - Activation of the PIN Code to lock settings which will be protected
by the PIN code.
3 - Customizing the PIN code, replace 0000 by the custmized code
OFF
or
.
3 times.
PIN code initialisation
By default, the PIN code is not enabled. The setting access is available in
Standby mode only.
1- By default registered PIN code is 0000.
Press
or
to select 0. It is blinking. Save by pressing
2- For others numbers, select 0 by press
When 0000 appears, press on
The PIN code is initialized, the next setting automaticaly appears:
. To
PIN Code activation.
Activation/deactivation of the PIN Code
OFF
1-
appears on the display.
Press
or
to enable PIN code.
ON
appears on the display.
ON
= PIN code enabled
OFF
= PIN code disabled
2- Press
to save and return to the home installer settings display.
The PIN code is enabled. Any modifi cation of reserved settings listed in
"Overview" is now impossible.
EN
1
2
.
again to save and exit.
M16MI328 A02_01/18
.
17
Advertenties
Hoofdstukken
Inhoudsopgave
