Inhoudsopgave
Advertenties
Digits on: Press and hold the buttons »
« and »
« simultaneously for 5 seconds.
For confirmation, the digits flash 4 times and then switch on again immediately.
The luminous digits can be activated for 60 seconds at any time by pressing any key.
Snooze function
You can interupt a current alarm by pressing on the spherical snooze button. The
alarm will be repeated after 5 minutes.
12 / 24 hour mode
The adjustment is made with
The time can be displayed in a 12- or 24 hour mode.
the »12h/24h« switch (18) on the back of the alarm clock.
Power cut backup
The battery compartment (15) can hold 4 batteries of size AAA (not included). In the
event of a power cut, these guarantee the continuation of the device settings, the time
and the display of the Lisa-Signolux alerts for about 1 day.
Please note: During a power cut, the digits and the flash are not active as the power
consumption is too high for the backup batteries! The batteries must be removed
when the alarm clock is not in use (with the mains adapter unplugged), otherwise they
will be discharged after 1 day.
Automatic pairing
Lisa-Signolux devices can be used together immediately and without prior pairing
as delivered.
Which event icon is displayed depends on the type of transmitter. This information can
be found in the user manual of the according transmitter.
Optional manual pairing
Note 1: If a transmitter is to be displayed with an event icon of your own choice, this
can be done as described in the chapter „Linking transmitter alerts with event icons".
However, this causes the »Receiver Alarm Clock« to lose the automatic pairing func-
tion and all transmitters previously shown on the alarm clock must be individually
paired.
English 22
Advertenties
Inhoudsopgave
