Inhoudsopgave
Advertenties
Setup
Connect the power supply unit to the 12 V DC socket (16) of the alarm clock and plug it
into a 230 V power outlet. After a few seconds, the alarm clock is functional.
Setting the time
To set the time, press the time set button »
« (1) for one second. The hour digits will
start to flash. Set the desired hour by turning the adjusting wheel (on the reverse side
of the of the clock) to the left or right.
Press the time set button »
« again. The minute digits will start to flash. Turn the
adjusting wheel to the left or right to set the desired minutes.
Pressing the time set button »
« again will end the time setting procedure and the
set time is displayed.
Setting the alarm time
To set the alarm time, press the alarm time button »
« (2) for one second. The hour
digits of the alarm time will start to flash. Set the desired hour by turning the adjusting
wheel to the left or right.
Press the alarm time button »
« again. The minute digits of the alarm time will start
to flash. Turn the adjusting wheel to the left or right to set the desired minutes.
Pressing the alarm time button »
« again will end the alarm time setting procedure
and the set alarm time is displayed.
Alarm ON / OFF
The waking alarm can be switched on and off with the slider switch (7) on the left side
of the alarm clock.
Slider in upper position (green area is visible): Alarm is switched ON.
Slider in lower position: Alarm is switched OFF.
Alarm tone ON / OFF
Press the alarm tone button » « (4) for one second to switch the alarm tone ON
or OFF. If the alarm tone is on, the speaker symbol (11) will be visible in the display.
English 20
Advertenties
Inhoudsopgave
