Download Inhoudsopgave Inhoud Print deze pagina

Setting The Nighttime Display Brightness; Deactivating The Illuminated Digits - HumanTechnik lisa signolux A-2634-0 Gebruiksaanwijzing

Inhoudsopgave

Advertenties

Setting the alarm tone volume
Press and hold the alarm tone button » « while adjusting the volume of the alarm
tone. After 2 seconds, the alarm tone can be heard. Keep the alarm tone button
pressed and turn the adjusting wheel to the left or right to adjust the desired alarm
tone volume. Release the alarm tone button to end the volume setting procedure.
Setting the alarm tone pitch
While adjusting the alarm tone pitch, press and hold both the alarm tone button » «
and the spherical snooze button (6) at the same time. After 2 seconds, the alarm tone
can be heard. Keep the alarm tone button and the snooze button pressed and turn
the adjusting wheel to the left or right to adjust the desired alarm tone pitch. Release
the buttons to end the pitch setting procedure.
Flash ON / OFF
Press and hold the flash button »
OFF. If the flash is on, the flash symbol (9) will be visible in the display.

Setting the nighttime display brightness

The brightness of the displayed digits is automatically adjusted according to the light
conditions within the room. During the day, the digits are displayed with full bright-
ness. In darkness, the set nighttime display brightness is activated.
To set the nighttime display brightness, press and hold the flash button »
the flash button pressed and turn the adjusting wheel to the left or right to adjust
the desired display brightness for the night. Release the button to end the setting
procedure.
If this adjustment is done during daylight conditions, the display will switch back to full
brightness after a few seconds.

Deactivating the illuminated digits

If the illuminated digits are too bright for you at night, even at their darkest setting, they
can also be deactivated completely. This has no influence on the indication of events!
Digits off: Press and hold the buttons »
For confirmation, the digits flash 2 times and then switch off after 60 seconds.
« (3) for one second to switch the flash ON or
« and »
« simultaneously for 5 seconds.
«. Keep
English 21

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

Lisa signolux a-2634-w

Inhoudsopgave