Hilti TE 500 Originele Gebruiksaanwijzing pagina 22
Verberg thumbnails
Zie ook voor TE 500:
- Gebruikershandleiding (19 pagina's) ,
- Handleiding (23 pagina's)
Advertenties
3.To switch off continuous operation, press control switch 1 and then release it.
▶
The power tool switches off.
Care and maintenance
WARNING
Electric shock hazard! Attempting care and maintenance with the supply cord connected to a
power outlet can lead to severe injury and burns.
▶
Always unplug the supply cord before carrying out care and maintenance tasks.
Care
• Carefully remove stubborn dirt from the tool.
• Clean the air vents carefully with a dry brush.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning agents containing silicone
as they can attack the plastic parts.
Maintenance
WARNING
Danger of electric shock! Improper repairs to electrical components may lead to serious injuries
including burns.
▶
Repairs to the electrical section of the tool or appliance may be carried out only by trained electrical
specialists.
• Check all visible parts and controls for signs of damage at regular intervals and make sure that
they all function correctly.
• Do not operate the product if signs of damage are found or if parts malfunction. Have it repaired
immediately by Hilti Service.
• After cleaning and maintenance, fit all guards or protective devices and check that they function
correctly.
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables.
Spare parts, consumables and accessories approved by Hilti for use with the product can be
found at your local Hilti Store or online at: www.hilti.group.
Transport and storage
• Do not transport electric tools with accessory tools fitted.
• Always unplug the supply cord before storing an electric tool or appliance.
• Store tools and appliances in a dry place where they cannot be accessed by children or unauthorized
persons.
• Check electric tools or appliances for damage after long periods of transport or storage.
Troubleshooting
If the trouble you are experiencing is not listed in this table or you are unable to remedy the problem
by yourself, please contact Hilti Service.
Troubleshooting
Trouble or fault
Power tool does not start.
17
Possible cause
The supply cord or plug is defec-
tive.
The generator is in sleep mode.
Action to be taken
▶
Have the supply cord or
the plug checked by a
trained electrical specialist
and replaced if necessary.
▶
Apply a load to the generator
by connecting a second power
consumer (e.g. worklight).
2227844
*2227844*
Advertenties
