Hilti TE 500 Originele Gebruiksaanwijzing pagina 19
Verberg thumbnails
Zie ook voor TE 500:
- Gebruikershandleiding (19 pagina's) ,
- Handleiding (23 pagina's)
Advertenties
Intended use
The product described is an electrically powered breaker. It is designed for medium-duty chiseling
work on masonry and concrete.
▶
Operation is permissible only when connected to a power source providing a voltage and frequency
in compliance with the information given on the type identification plate.
Items supplied
Breaker, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or
at: www.hilti.group
Technical data
Breaker
For rated voltage, rated current, frequency and/or input power, refer to the country-specific
type identification plate.
If the device is powered by a generator or transformer, the generator or transformer's power output
must be at least twice the rated input power shown on the rating plate of the device. The operating
voltage of the transformer or generator must always be within +5 % and -15 % of the rated voltage
of the device.
This device complies with the applicable standard provided that the maximum permissible supply
impedance (Zmax) at the point where the user's installation is connected to the public supply network
is less than or equal to 0,401 Ω. It is the responsibility of the installer or user of the device to ensure,
if necessary by consultation with the supply network operator, that the device is connected only at a
point where supply impedance is less than or equal to Zmax.
Product generation
Weight in accordance with EPTA procedure 01
Protection class in accordance with EN 60745
Noise information and vibration values
The sound pressure and vibration values given in these instructions were measured in accordance
with a standardized test and can be used to compare one power tool with another. They can also be
used for a preliminary assessment of exposure.
The data given represent the main applications of the power tool. However, if the power tool is used
for different applications, with different accessory tools, or is poorly maintained, the data can vary.
This can significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the power tool is
switched off, or when it is running but not actually being used for a job. This can significantly reduce
exposure over the total working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration,
for example: maintaining the power tool and accessory tools, keeping the hands warm, organization
of work patterns.
Detailed information on the versions of the EN 62841 standards applied here is to be found in
the reproduction of the declaration of conformity
Noise information
Sound power level (L
Uncertainty for the sound power level (K
*2227844*
)
WA
2227844
140.
)
WA
TE 500
03
4.9 kg
II
TE 500
100 dB(A)
3 dB(A)
14
Advertenties
