Hilti TE 500 Originele Gebruiksaanwijzing pagina 20
Verberg thumbnails
Zie ook voor TE 500:
- Gebruikershandleiding (19 pagina's) ,
- Handleiding (23 pagina's)
Advertenties
Sound pressure level (L
Uncertainty for the sound pressure level (K
Vibration information
Chiseling (a
)
h,Cheq
Uncertainty (K)
Operation
Preparations at the workplace
CAUTION
Risk of injury! Inadvertent starting of the product.
▶
Unplug the supply cord before making adjustments to the power tool or before changing
accessories.
Observe the safety instructions and warnings in this documentation and on the product.
Connecting the detachable supply cord
CAUTION
Risk of injury! Due to leakage current as a result of dirty contacts.
▶
Connect the detachable electric connector to the electric tool only when it is clean and dry and
when the supply cord is unplugged from the power outlet.
1.Push the keyed, detachable electric plug connector into the tool as far as it will go, until it is heard
to engage.
2.Plug the supply cord into the power outlet.
Disconnecting the detachable supply cord
1.Unplug the supply cord from the power outlet.
2.Press the release button and pull the keyed, detachable electric plug connector out of the socket.
3.Pull the supply cord connector out of the power tool.
2
Inserting the tool
1.Lightly grease the connection end of the accessory tool.
▶
Use only genuine Hilti grease. Using the wrong grease can result in damage to the tool.
2.Push the accessory tool into the tool holder as far as it will go and turn it until the Y-holder engages.
3.Pull the accessory-tool release back.
▶
The accessory tool can now be inserted fully into the tool holder.
4.Let go of the accessory-tool release to lock the accessory tool in the chuck.
5.After fitting the accessory tool, grip it and pull it in order to check that it is securely engaged.
▶
The product is ready for use.
Removing the accessory tool
▶
Pull the accessory tool locking ring back as far as it will go and remove the accessory tool.
Fitting the side handle (optional)
1.Release the side handle clamping band by turning the handle grip.
2.Slide the side handle clamping band over the tool holder from the front and into the recess provided.
3.Adjust the side handle to the desired position.
4.Tighten the side handle clamping band by turning the handle grip.
15
)
pA
3
4
)
pA
2227844
TE 500
92 dB
3 dB(A)
TE 500
13.5 m/s²
1.5 m/s²
*2227844*
Advertenties
