Inhoudsopgave
Advertenties
NOTE: The fan will run on for 30 seconds before
the unit switches off and the unit goes into standby
mode. The operation light
Before you cover the device or put it away,
wait until it has cooled down.
4.4 Appliance frost protection
The unit frost protection function is used exclusively to
protect the unit from frost and not to monitor the room
temperature. If the room temperature is below +7 °C,
the unit switches on automatically at heating level II
if the unit is in standby mode. Now the unit heats the
room until a room temperature of more than +7 °C is
reached. Once this is reached, the unit automatically
switches to fan mode.
4.5 Select operating mode
To change an operating mode, press the 2 /
G button repeatedly until the desired mode is
shown on the display.
To switch to ECO mode, press the 4 / B
button during operation.
Ad
Operating mode
Fan
No heating level is activated in fan
mode.
Heating level I
1000 W Heating capacity
Heating level II
2000 W Heating capacity
ECO
In ECO mode, the unit automatically
regulates a room temperature of
22 °C.
on the display flashes.
4.6 Temperature Setting
Press the plus button
increase the temperature you want.
Press the minus button
to decrease the temperature you want in fan
mode.
You can select a temperature between 15 ºC
and 35 ºC.
ATTENTION! When setting the temperature,
note that the appliance will not heat if the desired
temperature is lower than or equal to the room
temperature. To heat, the set temperature must be
at least 2 ºC higher than the room temperature. The
room temperature is automatically displayed when
the unit is switched on.
4.7 Timer function
The timer is used to switch off the unit automatically
after a preset time.
During operation, press button 3 / C to enter
the timer function. The hour display flashes and
lights up.
Press the plus button
button
6 / E repeatedly to set the hour
you want.
Wait approx. 5 seconds until the settings are
accepted.
4.8 ECO mode
In ECO mode, the unit automatically regulates a
room temperature of 22 °C.
During operation, press button 4 / B to switch
on the ECO function. The indicator
on the display.
Note: The default temperature for ECO mode is 22 °C.
7 / D repeatedly to
6 / E repeatedly.
7 / D or the minus
lights up
GB/IE/NI/CY/MT
13
Advertenties
Hoofdstukken
Inhoudsopgave
