Inhoudsopgave
Advertenties
Translation of the original instructions
- High Hot start for difficult-to-weld metals (dirty or oxydised)
When the machine is in MMA Pul-
feature:
• Press shortly the switch (5) to set the
• «FrE» (FREQUENCY) is displayed and
(display (1)).
• Set the desired frequency (Hz) using the
• The machine is ready to operate.
TUNGSTEN ELECTRODE WELDING WITH INERT GAS (TIG MODE)
CONNECTIONS AND RECOMMENDATIONS
TIG DC requires gas protection (Argon).
• TIG LIFT
Activating the TIG Lift mode and setting the intensity:
TIG
DOWNSLOPE feature: this is the time during which, after the downslope, the current is going down until the arc
DOWNSLOPE
16
When the machine is in MMA Pulsed mode:
• Press shortly the switch (5) to set the HOT START.
• «HS» (HOT START) blinks and a number is displayed
(display (1)).
0 - 100 %
• Set the desired percentage using the keys (4).
• Validate by pressing the switch (5).
OK
To set the frequency, follow these steps:
FREQUENCY
To do TIG welding, follow these steps :
1. Connect the earth clamp to the positive connector (+).
2. Connect a valve torch to the negative connector (–). (ref. 044425)
3. Connect the torch gas hose to the gas bottle regulator
It may be necessary to cut it before the nut if it is not suitable for the regulator.
4. Activating the TIG mode and setting the intensity (see paragraph: TIG LIFT).
6. Set the gas flow on the gas bottle regulator, then open the torch valve.
7. To start the arc : make contact between the electrode and the workpiece.
8.At the end of the weld: lift the torch quickly (up-down) to activate the automated
downslope (see paragraph below). This movement must be done at a height between
5 and 10 mm. Then close the torch valve to stop the gas after the electrode has cooled
down.
When the machine is in MMA Pulsed mode:
• Press the switch (5) for 3 seconds.
• «tIG» (TIG) blinks and a number is displayed (display (1)).
• Set the desired intensity using the keys (4).
• The machine is ready to operate.
(A)
OK
GYSMI E163
0,4 - 20 Hz
OK
EN
sed mode with HOT START
frequency.
then a number is displayed.
keys (4).
Advertenties
Inhoudsopgave
