Advertenties
Trouble or fault
LEDs of the battery show
nothing
The rotary hammer drill or
the battery gets very hot.
Accessory tool cannot be
released from the chuck.
Accessory tool makes no
progress.
Disposal
WARNING
Risk of injury due to incorrect disposal! Health hazards due to escaping gases or liquids.
▶
DO NOT send batteries through the mail!
▶
Cover the terminals with a non-conductive material (such as electrical tape) to prevent short
circuiting.
▶
Dispose of your battery out of the reach of children.
▶
Dispose of the battery at your Hilti Store, or consult your local governmental garbage disposal or
public health and safety resources for disposal instructions.
Most of the materials from which Hilti products are manufactured can be recycled. The materials
must be correctly separated before they can be recycled. In many countries, your old tools, machines
or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti sales representative
for further information.
▶
Do not dispose of power tools, electronic equipment or batteries as household waste!
Manufacturer's warranty
▶
Please contact your local Hilti representative if you have questions about the warranty conditions.
Further information
For more information on operation, technology, environment and recycling, follow this link:
qr.hilti.com/manual/?id=2351800&id=2351802
nl Originele handleiding
Informatie over de handleiding
Bij deze handleiding
• Waarschuwing! Zorg, voordat u het product gebruikt, dat u de bij het product meegeleverde
handleiding incl. de aanwijzingen, veiligheidsinstructies en waarschuwingsaanwijzingen, afbeeldin-
gen en specificaties gelezen en begrepen hebt. Maakt u zich met name met alle aanwijzingen,
veiligheidsinstructies en waarschuwingsaanwijzingen, afbeeldingen, specificaties en bestanddelen
en functies vertrouwd. Als u dit niet doet, bestaat het risico op een elektrische schok, brand
en/of ernstig letsel. Bewaar de handleiding inclusief alle aanwijzingen, veiligheidsinstructies en
waarschuwingsaanwijzingen voor later gebruik.
30
Possible cause
Battery defective
Electrical fault
Locking sleeve not pulled back
fully.
The rotary hammer drill has been
set to reverse rotation.
The function switch is set to
"Drilling without hammering"
Action to be taken
▶
Contact Hilti Service.
▶
Switch off the rotary hammer
drill immediately. Remove
the battery and keep it under
observation. Allow it to cool
down. Contact Hilti service.
▶
Pull the locking sleeve back
as far as it will go and remove
the accessory tool.
▶
Switch the forward/reverse
switch to the "Forward"
position.
▶
Set the function switch to
.
"Hammer drilling"
2351800
*2351800*
.
Advertenties
