Advertenties
▶
Never service damaged battery packs. Service of battery packs should only be performed by
the manufacturer or authorized service providers.
Hammer safety warnings
Safety instructions for all operations
▶
Wear ear protectors. Exposure to noise can cause hearing loss.
▶
Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury.
▶
Hold the power tool by insulated gripping surfaces, when performing an operation where the
cutting accessory may contact hidden wiring. Cutting accessory contacting a "live" wire may
make exposed metal parts of the power tool "live" and could give the operator an electric shock.
Safety instructions when using long drill bits with rotary hammers
▶
Always start drilling at low speed and with the bit tip in contact with the workpiece. At
higher speeds, the bit is likely to bend if allowed to rotate freely without contacting the workpiece,
resulting in personal injury.
▶
Apply pressure only in direct line with the bit and do not apply excessive pressure. Bits can
bend causing breakage or loss of control, resulting in personal injury.
Additional safety instructions
Personal safety
▶
Use the product and accessories only when they are in perfect working order.
▶
Never tamper with or modify the product or accessories in any way.
▶
Wear eye protection, a hard hat and ear protection while the product is in use.
▶
Wear protective gloves when changing accessory tools, because the accessory tool and the tool
holder get hot during use.
▶
Dust produced by grinding, sanding, cutting and drilling can contain dangerous chemicals. Some
examples are: lead or lead-based paints; brick, concrete and other masonry products, natural
stone and other products containing silicates; certain types of wood, such as oak, beech and
chemically treated wood; asbestos or materials that contain asbestos. Determine the exposure of
the operator and bystanders by means of the hazard classification of the materials to be worked.
Implement the necessary measures to restrict exposure to a safe level, for example by the use of a
dust collection system or by the wearing of suitable respiratory protection. The general measures
for reducing exposure include:
▶
working in an area that is well ventilated,
▶
avoidance of prolonged contact with dust,
▶
directing dust away from the face and body,
▶
wearing protective clothing and washing exposed areas of the skin with water and soap.
▶
Do not look directly into the light source (LEDs) incorporated in the power tool and do not direct
the light at other persons' faces.
▶
Always hold the product with both hands on the grips provided. Keep the grips dry, clean and free
from oil and grease.
▶
Take frequent breaks and do physical exercises to improve the blood circulation in your fingers.
High vibration during long periods of work can lead to disorders of the blood vessels and nervous
system in the fingers, hands and wrists.
▶
Do not touch rotating parts. Switch the product on only after it is in position at the workpiece.
Touching rotating parts, especially rotating accessory tools, can result in injury.
▶
Activate the switch-on interlock (forward/reverse switch in the middle position) for storing or
transporting the product.
▶
The product is not intended for use by debilitated persons who have received no special training.
Keep the product out of reach of children.
▶
If the work involves breaking right through, take the appropriate safety measures on the opposite
side. Parts breaking away could fall out and / or fall down and injure other persons.
20
2351800
*2351800*
Advertenties
