Advertenties
▶
Before beginning work, check the working area for concealed electric cables or gas and water
pipes. External metal parts of the product could give you an electric shock or cause an explosion
if you accidentally damage an electric cable or a gas or water pipe.
▶
In accordance with the applications for which it is designed, the product produces a high torque.
Always use the side handle and hold the product with both hands. The user must be prepared for
sudden sticking and stalling of the accessory tool.
▶
Secure the workpiece. Use clamps or a vice to secure the workpiece. The workpiece is thus held
more securely than by hand and in addition, both hands remain free to operate the product.
▶
Keep the air vents clear at all times. Risk of burn injuries due to blocked air vents!
▶
Working on the material may cause it to splinter. Wear eye protection, protective gloves and, if you
are not using a dust removal system, wear light respiratory protection. Flying fragments present a
risk of injury to the eyes and body.
▶
Risk of injury by falling tools and/or accessories. Before starting work, check that installed
accessories are secure.
▶
Do not attach a belt hook to this product.
Careful handling and use of batteries
▶
Comply with the following safety instructions for the safe handling and use of Li-ion batteries.
Failure to comply can lead to skin irritation, severe corrosive injury, chemical burns, fire and/or
explosion.
▶
Use only batteries that are in perfect working order.
▶
Treat batteries with care in order to avoid damage and prevent leakage of fluids that are extremely
harmful to health!
▶
Do not under any circumstances modify or tamper with batteries!
▶
Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over
80 °C (176 °F).
▶
Never use or charge a battery that has suffered an impact or been damaged in any other way.
Check your batteries regularly for signs of damage.
▶
Never use recycled or repaired batteries.
▶
Never use the battery or a battery-operated power tool as a striking tool.
▶
Never expose batteries to the direct rays of the sun, elevated temperature, sparking, or open flame.
This can lead to explosions.
▶
Do not touch the battery poles with your fingers, tools, jewelry, or other electrically conductive
objects. This can damage the battery and also cause material damage and personal injury.
▶
Keep batteries away from rain, moisture and liquids. Penetrating moisture can cause short circuits,
electric shock, burns, fire and explosions.
▶
Use only chargers and power tools approved for the specific battery type. Read and follow the
relevant operating instructions.
▶
Do not use or store the battery in explosive environments.
▶
If the battery is too hot to touch, it may be defective. Put the battery in a place where it is clearly
visible and where there is no risk of fire, at an adequate distance from flammable materials. Allow
the battery to cool down. If it is still too hot to touch after an hour, the battery is faulty. Consult Hilti
Service or read the document entitled "Instructions on safety and use for Hilti Li-ion batteries".
Observe the special guidelines applicable to the transport, storage and use of lithium-ion
batteries.
Read the instructions on safety and use of Hilti Li-ion batteries that you can access by
scanning the QR code at the end of these operating instructions.
*2351800*
28
2351800
21
Advertenties
