Advertenties
Changing Supply Cables and Vehicle Cables
Socket
Plug
DE
EN
H
FR
IT
ES
I
PT
NL
SV
FI
Changing Supply Cables and
DA
Vehicle Cables
NO
EL
DANGER
Risk of serious or fatal injury from electric shock.
CZ
e Before changing the supply cable, always unplug
HU
the supply cable from the electrical socket and
disconnect the vehicle cable from the vehicle
PL
charge port.
e Only change cables in a dry environment.
HR
e Use only cables approved by Porsche.
SR
f Refer to chapter "Scope of Supply" on
SK
page 25.
f Refer to chapter "Selecting a Supply Cable" on
SL
page 26.
ET
In some countries, e.g. in Norway, Italy, Portugal and
1)
Spain
, the supply cable may only be changed by a
LT
qualified electrician. Porsche recommends that you
LV
use a certified Porsche service partner.
RO
1) Time of printing. Further information is available from
your Porsche partner or from your local power supplier.
BG
MK
28
Standard and
designation
CEI 23-16-VII
Type L 16 A
(5 mm)
IA6A3 (BS 546)
Type M
Fig. 2: Connections on the control unit
Electric shock
The supply cable A can be removed and inserted at
the top of the control unit.
The vehicle cable B can be removed and inserted at
the bottom of the control unit.
Disconnecting cables
Fig. 3: Disconnecting cables
b Charging of the high-voltage battery is complete
and the vehicle plug has been removed from the
vehicle charge port.
b The plug has been disconnected from the
electrical socket.
1. Remove screw C using a suitable tool.
2. Lift the lever A.
3. Pull out the plug B until you feel initial resistance.
4. Close the lever A.
5. Pull out the plug B fully.
Advertenties
