Inhoudsopgave
Advertenties
Cleaning and maintenance
I
NOTE
If you are not going to use the cooling device for a long time, leave
the door slightly ajar to prevent unpleasant odours building up
➤ Place the cooling device on a firm base.
➤ Connect the connection cable to the AC mains supply.
✓ The cooling device starts cooling the interior.
➤ Set the temperature controller (fig. 1 1, page 3) to the desired tempera-
ture (3 – 12 °C).
➤ If you wish to switch the cooling device off, pull out the connection cable
or ...
➤ Rotate the temperature controller (fig. 1 1, page 3) anti-clockwise to the
OFF position.
8
Cleaning and maintenance
!
WARNING!
Always disconnect the device from the power supply before you
clean and service it.
A
NOTICE! Risk of damage
Never clean the cooling device under running water or in dish
water.
Do not use abrasive cleaning agents or hard objects during
cleaning as these can damage the cooling device.
➤ Use a soft cloth, lukewarm water and a mild detergent to clean the inside
of the cooling device.
➤ Wash out the cooling device using clean water and dry thoroughly.
➤ At annual intervals, remove dust from the cooling aggregate at the back
of the cooling device using a brush or a soft cloth.
10
RH430, RH440
EN
Advertenties
Hoofdstukken
Inhoudsopgave
