Inhoudsopgave
Advertenties
♦
To turn the appliance off, press and hold the
ON/TARE 4 button until the display 2 goes
out .
or
♦
Wait for approx . 60 seconds . The appliance
switches itself off automatically .
Totalising function
You can add individual measurements (max . 300 g
per measurement) together .
♦
Press the ON/TARE 4 button and carry out the
first measurement .
♦
Press the
weight of the material on the scale appear on
the display 2 .
♦
Remove the material from the spoon 1 and
add the next portion of material to be weighed .
The weight of the new material is now added to
the previous weight on the display 2 and the
total weight is shown .
♦
You can repeat this procedure until you have
reached 3000 g in total weight . If 3000 g is
exceeded, the display 2 shows "
NOTE
►
You cannot use the TARE function while you
are adding weights!
TARE function/measuring in a container
♦
If you want to weigh food in another container,
place the container in the spoon 1 first .
♦
Then press the ON/TARE button 4 to reset the
display to zero .
♦
When you add the food to the container, only
the weight of the food itself will be displayed .
If you take the container with the food off the
spoon 1, a negative value will be displayed .
♦
Now press the ON/TARE button 4 again to
return to the normal weighing mode .
Measuring liquids
The scale in the spoon 1 can be used for measuring
liquids (15–45 ml or 1–3 tablespoons) .
However, due to optical displacement, differences
of up to 15% can occur .
│
GB │ IE
■
8
/UNIT button 3 button . "
∑
" and the
∑
" .
SDL 300 C2
Advertenties
Hoofdstukken
Inhoudsopgave
