Inhoudsopgave
Advertenties
Note: The standby mode can be switched to selection-mode by pressing any button (except BOILING button).
• The display shows programme selection 1 "Herbal".
• Choose between the different preset programs by pressing the "MENU" button.
•
By pressing the TIME/TEMP button, the display switches from water temperature
• It is possible to switch between the display of temperature and time by pressing the "TIME/TEMP" button.
to the steeping time of the according program.
• The display will return to show the temperature after about 4 seconds.
•
After 4 seconds, the display returns to displaying the water temperature.
I F D E S IRE D , A D J U S T BRE W IN G T EMP ER A T U RE A ND
ST E E P I N G T IM E
a) Setting the brewing temperature (water temperature)
– If the water temperature is shown in the display, you can adjust it up or
down by pressing the adjustment buttons ▼ or ▲ until the desired tem-
perature lights up.
– The temperature can be set in steps of 5°C between 50°C and 100°C.
b) Setting the steeping time
– Press the TIME/TEMP button so that the steeping time shows up in the
display. Now, you can also adjust steeping time.
– Pressing the adjustment buttons ▼ or ▲ allows you to decrease or increase
steeping time. Keep pressing until the desired time lights up in the display.
– The steeping time can be set in steps of 30 seconds between 30 seconds
and 10 minutes.
c) Memory function for brewing temperature and steeping time
– If you wish to save your settings to have them automatically loaded when
selecting the according program in the future, press the TIME/TEMP but-
ton for at least 2 seconds after each setting. A signal sound tells you that
the programming has been done.
122
21
Advertenties
Inhoudsopgave
