Mounting The Crossbar - Actiforce ALUFORCE PRO 150 M Montagehandleiding
Verberg thumbnails
Zie ook voor ALUFORCE PRO 150 M:
- Montagehandleiding (22 pagina's) ,
- Montagehandleiding (25 pagina's)
Inhoudsopgave
Advertenties
3.4.2 Mounting the Crossbar
Assemble the following components:
#
Part name
01
Leg
07
Bottom Crossbar
08
Cover Crossbar
14.14 M10 spanner
14.16 M3 allen key
14.9
M6 flange nut
14.4
M6x20 set screw
14.5
M6x16 set screw
1
3
Photo 1
•
Place the legs flat on the floor, parallel to each other.
Be aware that both slide nuts point upwards.
•
Fasten the set screws in the slide nuts (M6 x 20 set screw into the upper slide nut, M6 x 16 set
screw into the lower slide nut)
•
Gently tighten the set screws with the Allen key.
Photo 2
•
Place the bottom crossbar over the set screws.
Qty
2
1
2
1
1
4
2
2
2
4
9
Advertenties
Hoofdstukken
Inhoudsopgave
