Actiforce ALUFORCE PRO 150 M Montagehandleiding pagina 14
Verberg thumbnails
Zie ook voor ALUFORCE PRO 150 M:
- Montagehandleiding (22 pagina's) ,
- Montagehandleiding (25 pagina's)
Inhoudsopgave
Advertenties
3.4.5 Mounting the Hex Shafts and Axle Drive
Assemble the following components:
#
Part name
05
Hex Shaft
06
Axle Drive
14.14
M10 spanner / key 14
10
Drive Unit
Be aware that both legs are completely in the lowest position.
Be aware that the drive units have not been connected to a power source and not been
used.
Be aware that all components are originally packed.
11
12
Photo 11
•
Slide the 2 hex shafts through the hexagon holes in the 2 legs.
•
Slide both hex shafts in until they stick ±15 cm inside the frame.
Photo 12
•
Slide the drive unit over the hex shaft. At the side where the up-down switch need to be
placed.
Photo 13
•
Slide the axle drive over both hex shafts.
•
Slide both hex shafts inward, until they are flush with the surface (of the outside) of the leg.
13
Qty
2
1
1
1
12
14
Advertenties
Hoofdstukken
Inhoudsopgave
