Download Inhoudsopgave Inhoud Print deze pagina

Bc Harness Adjustment - General Features; General Specifications - Scubapro Hydros X BCD Gebruikershandleiding

Trimjackets
Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 31

8. BC HARNESS ADJUSTMENT - GENERAL FEATURES

! WARNING
Adjust the BC so that it does not restrict your breathing when fully inflated. Restriction of
normal breathing while wearing your BC could result in injury or death. Before each use, check
all bands, straps, quick-connect clips, and/or cummerbund for proper adjustment to the user.

9. GENERAL SPECIFICATIONS

Operating temperature range
Air
- 20°C
Water - 2° C
Low pressure Hose / Pneumatic Inflation Valve
LP hose and Pneumatic Inflation Valve operating pressure
Low Pressure Hose Fitting threads
O-Rings - Seals
! WARNING
This product is designed to use air or helium/nitrogen/oxygen mixtures containing
up to 40% oxygen. Use of gas mixtures with increased oxygen, or the addition of other
substances, may cause corrosion, deterioration, premature aging or component failure
of metal and rubber parts. These actions may result in loss of buoyancy control or air
holding integrity of the BC, resulting in injury or death. Non-standard gas mixtures may
also present a risk of fire or explosion.
! WARNING
Avoid prolonged or repeated exposure to chlorinated water, such as in swimming pools.
Wash your BC immediately after any use in chlorinated water. Chlorinated water can
oxidize fabrics and materials on your BC, thereby shortening their life, and cause colors
(especially neon) to fade. Damage and fading from prolonged exposure to chlorinated
water is specifically not covered under warranty.
! WARNING
Due to heavy usage, BCs used for rental/diving centres, professional purposes or other
intensive use must be checked at least every 6 months.
Overall conditions and main safety parts such as the bladder, valves, elbow, corrugated
hose, BPI must be inspected.
If any of the above parts shows wear or diminished performance it should be replaced
immediately or removed from usage, if replacement is not possible.
6
16791-00-Scubapro_jacket_readfirst-totale.indb 6
16791-00-Scubapro_jacket_readfirst-totale.indb 6
to
+50° C
-4° F
to
to
+40° C
28° F
to
122° F
104° F
95 – 200 psi (6.5 – 13.8 bar)
3/8 – 24 UNF
EPDM, Buna/Nitrile - Silicone
03/08/2020 09:44:25
03/08/2020 09:44:25

Advertenties

Inhoudsopgave
loading

Inhoudsopgave