Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
During cleaning, press the Spot mode button
on the robot vacuum cleaner
control
to start this mode.
29
As soon as the surface is sufficiently clean, the
product continues with the automatic cleaning
programme.
Spot mode can also be started from Standby
mode. Press the CLEAN button on the robot
vacuum cleaner
11
Then press the Spot mode button on the robot
vacuum cleaner
14
After the cleaning programme has ended in
Spot mode, the product will return to Standby
mode.
Note: You can also end Spot mode by press-
ing the CLEAN button once on the robot vacuum
cleaner
or on the remote control
11
Note: By pressing the CLEAN button again
on the robot vacuum cleaner
control
, the product will return to the original
27
cleaning mode.
Note: If the product is in Standby mode and
is approx. 30 cm away from the charging dock
, it will automatically return to the charging
2
dock
.
2
Corner mode
This mode is suitable for cleaning the corners and
edges of a room. In Corner mode, the product follows
a barrier (for example a wall).
During cleaning, press the Corner mode button
on the remote control to start this mode.
28
As soon as the surface is sufficiently clean, the
product continues with the automatic cleaning
programme.
Corner mode can also be started from Standby
mode. Press the Clean button on the robot vac-
uum cleaner
or on the remote control
11
Then press the Corner mode button
remote control. After the cleaning programme
has ended in Corner mode, the product will
return to Standby mode.
Note: You can end Corner mode by pressing
the CLEAN button once on the robot vacuum
cleaner
or on the remote control
11
or the remote
14
or on the remote control
or on the remote control
.
27
or the remote
11
27
on the
28
.
27
Note: By pressing the CLEAN button again
on the robot vacuum cleaner
control
, the product will return to the original
27
cleaning mode.
Note: If the robot vacuum cleaner is in Standby
mode and approx. 30 cm away from the charg-
ing dock
2
charging dock
.
27
MAX mode
.
This mode is suitable if the floor is very dirty or dusty.
29
Whilst the product is cleaning in Auto or Corner
mode, press the
on the remote control. The suction power will
increase.
Press the
switch to the current mode with normal suction.
Return mode
Use this mode to return the product to the charging
dock
.
2
Note: The robot vacuum cleaner automatically
returns to the charging dock
is low.
Press the "Return mode" button on the robot
vacuum cleaner
return the robot vacuum cleaner to the charging
dock
.
2
Time-delayed cleaning /
fixed time
Using this function, you can set a time period, after
which the product will begin cleaning. Smallest time
period: 15 minutes, largest time period: 23 hours
and 45 minutes.
.
Press the CLEAN button on the robot vacuum
cleaner
or on the remote control
11
notification is visible in the display
Press the Set schedule button on the robot vac-
uum cleaner
last two digits in the display
Using the Return mode
buttons on the robot vacuum cleaner, set the
desired time in minutes (00, 15, 30, 45). To do
or the remote
11
, it will automatically return to the
.
2
"MAX mode" button
"MAX mode" button
26 a
when the battery
2
or the remote control
13
1
or the remote control
12
will flash.
1
and Spot mode
13
26 a
again to
to
25
(if no
27
).
. The
30
14
GB/IE
27
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
