Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4.5
Fitting the electric components
Optional alarm probe (art. no. 20222, 20223) ➊
▶ Screw the probe holder to the pre-fitted thread.
3
▶ Clip the probe to the holder.
Install the pump
▶ Connect the pump to the pressure connection. ➋
▶ Lock the quick-release closure in position.
▶ Pull the pump cable through the conduit pipe.
L Make sure that the float switch is hanging freely (at-rest position).
2
1
Fig. [9]
016-083_02
Installation and operating manual
37
Advertenties
Hoofdstukken
Inhoudsopgave
