Sound: Declared dual-number noise emission values in accordance with ISO4871 and
ISO3744. The A-weighted sound power level and A-weighted sound pressure level of the
mask at a distance of 1 m, with uncertainty of 3 dBA, are shown.
Power level (with QuietAir elbow): 21 dBA
Pressure level (with QuietAir elbow): 14 dBA
Power level (with standard elbow): 31 dBA
Pressure level (with standard elbow): 23 dBA
Environmental conditions
Operating temperature: 5°C to 40°C
Operating humidity: 15% to 95% non-condensing
Storage and transport temperature: -20°C to +60°C
Storage and transport humidity: up to 95% non-condensing
Gross dimensions
Mask fully assembled (H x W x D)
110 mm x 116 mm x 102 mm
International Commission on Non-Ionising Radiation Protection (ICNIRP)
Magnets used in this mask are within ICNIRP guidelines for general public use.
Service life
The service life of the AirFit F30 mask system is dependent on the intensity of usage,
maintenance, and environmental conditions to which the mask is used or stored. As this
mask system and its components are modular in nature, it is recommended that the user
maintain and inspect it on a regular basis, and replace the mask system or any
components if deemed necessary or according to the 'Visual criteria for product inspection'
in the 'Warning' section of this guide.
Note: The manufacturer reserves the right to change these
specifications without notice.
Storage
Ensure that the mask is thoroughly clean and dry before storing it for any length of time.
Store the mask in a dry place out of direct sunlight.
Disposal
This mask and its packaging do not contain any hazardous substances and may be
disposed of with your normal household refuse.
Reprocessing the mask between patients
Reprocess this mask when using between patients. Cleaning, disinfection and sterilisation
instructions are available on ResMed.com/downloads/masks. If you do not have internet
access, please contact your ResMed representative.
8