Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Adjusting your mask
•
With the device turned on and blowing air, adjust the position of the
cushion for the most comfortable fit under your nose. Ensure that the
cushion is not creased and the headgear is not twisted.
•
To fix any leaks at the upper or lower part of the mask, adjust the top,
upper or lower headgear straps. Adjust only enough for a comfortable
seal and do not overtighten.
Removing your mask
1. Twist and pull both magnetic clips away from the frame.
2. Pull the mask away from your face and back over your head.
Disassembling your mask for cleaning
If your mask is connected to a device, disconnect the device air tubing
from the mask elbow.
1. Undo the fastening tabs on the upper headgear straps and pull them
from the frame. Keep the magnetic clips attached to the lower
headgear straps.
2. Squeeze the side buttons on the elbow and detach from the frame.
3. Hold the top and bottom of the cushion and separate from the frame.
Cleaning your mask
After each use: Elbow, frame, cushion
Weekly: Headgear
1. Soak the components in warm water with a mild liquid detergent.
Ensure that there are no air bubbles while soaking.
4
Advertenties
Inhoudsopgave
