Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Water as foodstuff
Water is a very sensitive foodstuff and can go
bad due to germs forming. Please take note:
• Always use fresh drinking water in the
kettle 2.
• Pour water away, which has been
standing in the kettle 2 for longer than
approx. 1 hour.
• Do not reboil cooled down water.
Boiling water
1. Remove the kettle 2 from the device
base 5.
2. Press the release button 10 to open the
lid 9.
3. Fill the kettle 2 with fresh drinking water -
minimum 0.5 litres, maximum 1.7 litres.
Keep it upright or place it on an even sur-
face to be able to read the water level
display 3 correctly. The indicator for the
minimum filling level of 0.5 l can be
found inside the kettle.
4. Close the lid 9, by pressing it down-
wards.
5. Place the kettle on the device base 5.
6. Insert the mains plug 6 into a readily
accessible earthed wall socket whose
voltage matches the voltage stated on
the rating plate.
7. Press the on/off switch
it lights up and locks into place.
8. The device automatically switches off as
soon as the water starts to boil, or when
you remove the kettle 2 from the device
base 5.
9. Disconnect the mains plug 6 from the
wall socket.
10.Remove the kettle 2 from the device
base 5 and pour the water out.
NOTE: to interrupt the cooking process,
press the on/off switch
7 down, until
7 up.
8. Cleaning
DANGER! Risk of electric
shock!
Pull the mains plug 6 out of the wall
socket before you clean the kettle 2.
The kettle 2, the device base 5, the pow-
er cable and the mains plug 6 must not
be immersed in water or other liquids.
DANGER! Risk of injury
through scalding!
The kettle 2 becomes very hot during op-
eration. Allow it to cool down before
cleaning.
WARNING! Risk of material damage!
Do not use any astringent or abrasive
cleaning agents.
Cleaning the kettle
1. Disconnect the mains plug 6 from the
wall socket.
2. Wipe the kettle 2, the device base 5
and the power cable 6 with a damp
cloth if necessary. Dry with a dry cloth.
3. Allow all parts to dry completely before
you put them away or use the device
again.
Cleaning the limescale filter
1. Open the lid 9.
2. Pull the limescale filter 1 inwards and
off upwards from the kettle 2.
3. Clean the limescale filter 1 with a moist
dishcloth under running water.
4. Slot the limescale filter 1 into the spout
of the kettle 2 and press it into the open-
ing.
7
GB
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
