Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Safety instructions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and instructions may result
in electric shock, fire and/or serious injury.
For safety instructions, please refer to the enclosed bro-
chure "Safety instructions for crosscut and mitre saws".
Description of device / spare parts
Please refer to the attached assembly and operating instruc-
tion sheet.
Pos. Order-no. Designation:
1
366449
Handle with On/Off switch
1A
366451
On/Off switch
1B
Laser switch
1C
366452
Switch lock
2
Carrying handle
3
Motor
4
Carbon brush cover
5
Transport locking pin
6
363543
Set screw for the pulling device
7
Locking screw for rotary table
7A
Rotary table locking
8
Rotary table
9
366445
Table insert
10
Scale for mitre angle
11
366442
Work piece stop
11A
366443
Auxiliary stop
11B
366444
Locking screw for auxiliary stop
12
Set screw for work piece stop
13
366450
Laser head
13A
Battery compartment
14
Locking screw for the laser
15
Protective cover
16
366446
Pendulum cover
16A
Holder for the pendulum cover
18
363572
Support arm
18A
363454
Work piece support
19
Vice assembly
20
363536
Star grip nut for vice assembly
21
Star grip
22
Dust bag
23
Exhaust neck
24
366447
Incline angle locking handle
25
Scale for incline angle
26
Indicator for incline angle
27
Set screw for 90° saw head position
28
Locking nut for set screw (90°)
29
Set screw for 45° saw head position
30
Locking nut for set screw (45°)
31
Set screw for the saw blade position
32
Locking nut for set screw (saw blade
position)
15
33
Adjusting screw for groove depth
34
Stop for adjusting screw
(groove depth)
35
Hexagonal screw for saw blade mounting
36
Front saw blade flange
37
366448
Saw blade ( 305x30x3.0x60T)
38
Rear saw blade flange
39
Saw blade locking device
40
Mounting holes
41
Carbon brush
42
Installation wrench
43
363623
Warning label 1
44
366062
Warning label 2
45
366453
Data / Safety label
Preparing for commissioning
To achieve flawless functioning of the machine, please
follow the instructions listed:
Place the machine at a location that meets the following
conditions:
secured against slipping
free of vibrations
even
free of tripping hazards
adequate light
Before each use, check
Connection cables for defects (cracks, cuts, etc.).
Do not use any defect cables
the table insert for proper condition
the saw blade for flawless condition
Do not use deformed or damaged saw blades.
Immediately replace a worn or damaged table insert.
Connect the machine to a dust collection device when saw-
ing wood.
To ensure a safe position of the saw it must be bolted down
on a solid surface (e.g. workbench or support frame) at opti-
mal working height:
Mounting on a workbench / work table:
Place the device on a level flat workbench or work table.
An uneven surface may result in saw blade jamming
or inaccurate cutting.
Make 4 holes in the workbench / work table matching the
holes in the base plate (40).
Bolt the device down.
Removing the transport locking pin
Remove the transport locking pin before use:
Slightly push the handle (1) down
Pull out the transport locking pin (5).
Advertenties
Hoofdstukken
Inhoudsopgave
