Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Symbols operating instructions
Potential hazard or hazardous situation. Failure to
observe these instructions may lead to injuries or
cause damage to property.
Important information on proper handling. Failure
to observe these instructions may lead to malfunc-
tion.
User information. This information helps you to use
all the functions opt4imally.
Assembly, operation and servicing. Here you are
explained exactly what to do.
Please refer to the attached assembly
and operating instruction sheet for
references to figure numbers in the
text.
Characteristics noise values
DIN EN ISO 3744 / DIN EN ISO 11202 / ISO 7960 Appendix A
Use of machine as crosscut and mitre saw with standard saw
blade.
Noise power level
Operation
L
= 111,5 dB(A)
WA
under load
The factor of measurement uncertainty is 3 dB.
The values given are emission values and must therefore not simulta-
neously represent safe workplace values too. Although there is a
relationship between emission and immersion levels, it can be reliably
deduced whether additional precautionary measures are necessary or
not. Factors, which can influence the immersion level currently existing
at the workplace include the duration of the effects, the special type of
the workroom, other noise sources, etc. e.g. the number of machines
and other adjacent processes. The permissible workplace values can
also vary from country to country. This information should however
enable an improved assessment of the danger and risk to be carried
out.
Normal intended use
The device is suitable to cut wood and other wood-type
materials (e.g. particle boards) in the house and hobby field.
The device is suitable for crosscuts, inclined cuts, mitre cuts
and double mitre cuts.
The cutting of round material and irregularly shaped materi-
als (rickers, poles, fire wood etc.) is not permitted since
these work pieces cannot be held securely.
Only work pieces that can be put down securely and held
with clamping devices may be processed.
The use of saw blades made of HSS steel (high-alloy high
speed steel) is not permitted since this steel is hard and brit-
tle. Risk of injury through saw blade breakage and expulsion
of saw blade pieces.
Sound pressure level at
the workplace
L
= 98,5 dB(A)
PA
The intended usage also includes compliance with the oper-
ating, servicing and repair conditions prescribed by the man-
ufacturer and following the safety instructions included in the
instructions.
Follow the relevant accident prevention rules for operation
and other generally recognised health and safety at work
rules.
Any other use is deemed not to be use as prescribed. The
manufacturer is not liable for any type of damage resulting
from this: the user bears the sole risk.
Independently made alterations to the saw preclude any
liability of the manufacturer for resulting damages of any
kind.
The saw may only be equipped, used and serviced by per-
sons who are familiar with these and have been instructed in
the hazards. Repair works may only be carried out by us or
by a customer service agent nominated by us.
This machine must not be used in an explosive environment
or exposed to rain.
Metal parts (nails, etc.) must be removed from the timber to
be sawn.
Residual risks
Even if used properly, residual risks can exist even if the rele-
vant safety regulations are complied with due to the design
determined by the intended purpose.
Residual risks can be minimised if the "Safety advices" and the
"Intended usage" as well as the whole of the operating instruc-
tions are observed.
Observing these instructions, and taking proper care, will reduce
the risk of personal injury or damage to the equipment.
Danger of injury of fingers and hands by the tool (saw blade)
or work piece, e.g. when replacing the saw blade.
Injury by catapulted workpiece parts.
Throwback of the workpiece or workpiece parts.
Breakage and expulsion of saw blade.
Risk from electricity when using improper electrical connec-
tions.
Touching live parts of opened electrical components.
Impairment of hearing when working on the machine for
longer periods of time without ear protection.
Emission of harmful timber dust when operating without
exhaust suction.
In addition, in spite of all the precautionary measures taken,
non-obvious residual risks can still exist.
14
Advertenties
Hoofdstukken
Inhoudsopgave
