Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Resetting Home Connect settings
If there is a problem when trying to establish a
connection or if you would like to register the appliance
in a different home network (WLAN), the Home Connect
settings can be reset:
1. Press the Super button and the adjustment button -
simultaneously.
"Cn" is shown in the freezer compartment display.
Note
Press both buttons simultaneously.
2. Keep pressing the Options button until "rE" is shown
in the freezer compartment display and "OF" is
shown in the refrigerator compartment display.
3. Press the adjustment button +.
An animation is shown in the refrigerator
compartment display for 15 seconds.
"OF" is subsequently shown in the refrigerator
compartment display.
The Home Connect settings have been reset.
Information on data protection
When your Home Connect refrigerator is connected for
the first time to a WLAN network that is connected to
the Internet, your appliance transmits the following
categories of data to the Home Connect server (initial
registration):
Unique appliance identification (consisting of
■
appliance codes as well as the MAC address of the
installed Wi-Fi communication module).
Security certificate of the Wi-Fi communication
■
module (to ensure a secure IT connection).
The current software and hardware version of your
■
domestic appliance.
Status of any previous resetting to factory settings.
■
This initial registration prepares the Home Connect
functions for use and is required only when you want to
use Home Connect for the first time.
Note
Note that the Home Connect functions can be used
only in conjunction with the Home Connect app.
Information on data protection can be accessed in the
Home Connect app.
Declaration of conformity
BSH Hausgeräte GmbH hereby declares that the
appliance which features Home Connect functionality is
in accordance with the basic requirements and the
other relevant provisions of the directive 1999/5/EC.
A detailed R&TTE Declaration of Conformity can be
found online at www.siemens-home.bsh-group.com
among the additional documents on the product page
of your appliance.
Sabbatical mode
Sabbatical mode settings:
Accoustic signal is switched off.
■
Super cooling or super freezing is then ended
■
(if activated).
The light is switched off.
■
The light on the display panel is reduced to basic
■
lighting.
Buttons are locked (except "options" button and
■
setting button +).
Switching sabbatical mode on and off
1. To activate, simultaneously press the Options button
and setting button + for 5 seconds.
The display field indicates that the sabbatical mode
is switched on.
2. To deactivate, simultaneously press the Options
button and setting button + for 5 seconds.
en
47
Advertenties
Hoofdstukken
Inhoudsopgave
