Advertenties
Beschikbare talen
Beschikbare talen
6.1
Powering the
Locator on and
off
6.2
Selecting
frequency
Fig. 5: Frequency Selection Menu. The
Frequency is shown in the upper right
corner.
To power on the Locator, briefly press the
On/Off key (Fig. 1, position 2).
When the Locator is powered on, the top part
of the light framing the On/Off key lights up
green.
The display powers up after about two seconds.
To power off the Locator, press and hold the
On/Off key for about one second.
the
Before locating the camera head, the user must
select which frequency the locator should search
for.
Make sure you know the frequency of the
transmitter of your camera head. (Operating
Instructions of the camera, chapter "Specifica-
tions")
The locator offers the following options:
8.9 kHz, 9.2 kHz and Auto
If "Auto" is selected, the locator automatically de-
termines the frequency of the transmitter of the
camera head.
NOTE!
If the "Auto" function has been selected, the loca-
tor can only locate the camera head; if it is within
1 m of it.
The selected frequency is shown in the upper right
corner of the locator display, see Fig. 2, Part 8.
Proceed as follows to make your selection:
With the locator on, briefly press the On/Off
button to enter the Frequency-Selection-
Menu.
Use the -/+ buttons to select the frequency.
Briefly press the On/off button again to confirm
your selection.
Operating the Locator
EN
27
Advertenties
