Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
DESCRIPTION OF THE APPLIANCE
The description and characteristics shown in this document are for information only and not obligatory. Indeed, we reserve
the right to carry out any modification or improvement of the quality of certain of our products without prior notice.
This apparatus is designed for application with an external motor. A external motor should therefore be fitted to the
apparatus which operates in a separate place, the apparatus being used as the connector base for the air to be exhausted
(Fig.1). Use only motors proposed in the original catalogue (max 380 Watt).
This apparatus conforms to the 16.08.89 regulation relating to the limitation of radio-electric disturbances (EC Directive n./
6.889 modified by the EC Directive 8/.308.).
INSTALLATION
It is advisable to entrust the installation operations to specialised personnel.
Read carefully the indications in the paragraph "IMPORTANT" at page 8 of the instruction booklet.
To facilitate installation, before starting remove the grease filter/s: press inward on the clamp at the handle and pull the
filter downward (Fig. 2/3).
Fig. 2
Cut a hole in the bottom of the pensile cupboard in order to settle the appliance (Fig. 4a). The pensile cupboard bottom must be
15 or 18 mm thick.
Check that the fixing tabs (Fig. 4b) to the wall unit are positioned at a height suited to the thickness of the bottom of the
wall unit. If this distance is less than the thickness, increase it by unscrewing the 2 corresponding screws inside the hood.
Fig. 4a
THICKNESS 15÷18mm
Fig. 1
MODELS
DHG360XP1
DHG370XP1 676mm (
Fig. 3
A
±
496mm (
1mm)
±
1mm)
9
Fig. 4b
Advertenties
Inhoudsopgave
