Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
FUNCTIONING OF THE APPARATUS
CONTROLS - Fig. 8:
A) ON/OFF - lamps. This button is also used for the alarm function of the
anti-grease and carbon filters.
Filter alarm: After 30h of motor operation, the L1 RED LED comes ON
and remains ON for 30" (the anti-grease filters have to be cleaned).
After 120h of motor operation, the L1 RED LED comes ON and flashes
for 30" (the carbon filters have to be changed if the hood is so equipped).
The Filter Alarm is ONLY given with the motor is OFF.
The Filter Alarm is cancelled (HOUR meter reset) by holding down button A for 2".
B) Press button B to start the motor at Speed 1. The speed is shown by the L1 GREEN LED coming ON. When held down for
2", the motor switches off. A single pressure on the button when the LED is ON activates the timer function (motor ON for 5'),
shown by the flashing LED. To cancel the timer function, press the button again ONCE.
C) Press button C to start the motor at Speed 2. The speed is shown by the L2 GREEN LED coming ON. A single pressure
on the button when the led is on activates the timer function (motor on for 5'), shown by the flashing led. To cancel the timer
function, press the button again ONCE.
D) Press button D to start the motor at Speed 3. The speed is shown by the L3 GREEN LED coming ON. A single pressure
on the button when the led is on activates the timer function (motor on for 5'), shown by the flashing led. To cancel the timer
function, press the button again ONCE.
E) Press button E to start the il motor at Speed 4. The speed is shown by the L4 GREEN LED coming ON. A single pressure
on the button when the led is on activates the timer function (motor on for 5'), shown by the flashing led. To cancel the timer
function, press the button again ONCE.
Technical data - DHG360XP1:
-
Voltage: 230-240V single phase
-
2 halogen lamps 20W
-
Supplied with 150 cm electricity supply cable with plug.
-
Gross weight: Kg.4,9
-
Net weight: Kg.4
-
1 metallic grease filter
Dimensions (Fig. 9)
ELECTRICITY CONNECTION
While connecting the electricity make sure that the tension is that indicated in the technical lable.
Before proceeding to cleaning or maintenance operations remove the tension.
Connecting the electricity must be performed by a specialised technician in conformity with the regulation in force.
This apparatus is constructed so as to belong to the I insulation class and therefore needs grounding.
Technical data - DHG370XP1:
-
Voltage: 230-240V single phase
-
2 halogen lamps 20W
-
Supplied with 150 cm electricity supply cable with plug.
-
Gross weight: Kg.6
-
Net weight: Kg.5
-
2 metallic grease filters
Fig. 9
11
Fig. 8
Advertenties
Inhoudsopgave
