Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4.3.10 Flexzone
This function allows you to join the 2 left and 2 right zones
so they operate as 2 large flex zones. This function can be
activated manually, or automatically when a large pot/pan be
placed on the cooking surface.
Flexzone
Manual activation
Simultaneously press the 2 zone selection
keys of the 2 flex zones A1, A2 or B1, B2 to be
shared.
Automatic activation
Place a pot on the zones A1, A2 or B1, B2.
Increase the power
Slide your finger over the left slider until you
reach the desired power level, both flex zones
display the chosen power.
Switch bridge function off
Simultaneously press the 2 zone selection keys
of the 2 combined zones.
4.3.11 Grill function
This special cooking function optimises heating and warming
in a cast iron pot/grill plate. This will ensure improved results of
the food you are cooking. Flex zones A1 and A2 or B1 and B2
will be automatically shared using the bridge function.
Grill function:
Activate
Select a cooking zone using the zone selection
key. Press
Increase the power
Glide your finger over the left slider until you
reach the desired power; both zones display
the chosen power.
Switch grill off
Select a cooking zone using the zone selection
key. Press
4.3.12 Locking the controller
To avoid a hob selection being changed, during cleaning for
example, the controller must be locked (except the on/off
button).
This function can only be activated 10 seconds after switching
the hob on.
Locking
Lock
Press the
for 2 seconds.
The symbol now lights up brightly.
Unlock
Press the
for 2 seconds.
The symbol now lights up normally.
5 Controlling the extraction tower
5.1 Extractor hood control panel
Display
0
Switch on/lift extraction tower position
0‐9
Decrease extraction speed
Increase extraction speed
Switch off/lower extraction tower position
0
Extraction speed indication
Cleaning indication for grease filter
Cleaning indication for recirculation filter (optional)
Preset extraction function
Extractor hood lock button
5.2 Operation via mobile application
This cooker hood can also be remotely controlled via a mobile
Display
device. Is the Novy application on your mobile device installed,
then you can connect it to the cooker hood. When the cooker
hood is not connected to the mobile device itself, the cooker
hood can be operated in the normal way using the remote
control of the cooker hood itself.
Set up
To use the Novy application for your cooker hood and appliance
installation you will need the following:
– The cooker hood must be connected to the mains power
supply and to be turned on.
– A smartphone or tablet with a current version of iOS or
Android operating system.
– Download the Novy application through your favourite app
store. Your cooker hood and mobile device should be within
range of each other
The application will guide you through the entire procedure.
Follow the clues in the application.
Display
– 57 –
Extraction control
Advertenties
Hoofdstukken
Inhoudsopgave
