Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4.3.4 Power function
The Power function
increases the power rating of the selected
P
cooking zone. If this function is activated, these cooking zones
will be subjected to considerably higher power for 10 minutes.
The Power function is designed to quickly heat large quantities
of water, for pasta for example.
Switching Power on and off:
Switch on power
At the end of the slider push [ P ]
Switch off Power
Glide your finger over the slider
Management of maximum power:
The hob is divided into 2 or 3 separate heating groups
depending on the hob model.
C2
C1
Novy Panorama Pro 120 with 4 cooking zones
B2
B1
Novy Panorama Pro 120 with 5 cooking zones
If this power limit is exceeded when switching to a high
selected cooking heat or switching the power function on, the
power management module reduces the cooking position of
the relevant cooking zone. This cooking zone will first flash,
and it is then automatically reduced to the maximum possible
cooking heat
The maximum individual power for each zone is 3000 W.
If simultaneous cooking is taking place on zones A1 and A2 or B1
and B2, the power of 3700 W is divided between these 2 zones
A1 and A2 or B1 and B2 or C1 and C2.
Display
P
9‐0
A2 A1
A2 A1
C2
Cooking zone in cm
A1
24 x 20
A2
24 x 20
B1
24 x 20
B2
24 x 20
C1
Ø 23
C2
Ø 28
Power limit
Selected cooking zone with Power function
Power limit activated
[9] reduced to [8] and flashes
To use the maximum possible power for 2 zones (42110 or
42120) or 3 zones (42120) at the same time, a combination of
zones from the 2 separate heating groups is needed:
4 zones (42110):
5 zones (42120):
* If you have any questions about your connection, contact your installer.
4.3.5 Timer function
The timer function allows all cooking zones to be used
simultaneously for different periods of time (0 to 1H59 minutes)
for each zone.
Setting or changing the cooking time
Select the power by gliding your finger over the
slider
Select the timer
Press the timer icon above the zone selection
key for the required cooking zone
Reduce the time
Press [–] on the timer
Increase the time
Press [+] on the timer
After a few seconds the LED
has been selected and the countdown has begun.
– 55 –
Power (W)
Normal: 2100
Power: 2500
Super Power: 3000
Normal: 2100
Power: 3000
Normal: 2300
Power: 3000
- zone A1 or A2 and C1 or C2
- zone A1 or A2 or C2 and B1 or B2
(in case of a 2-phase connection)*
- zone A1 or A2 and B1 or B2 and C2
(in case of a 3-phase connection)*.
Timer function
no longer flashes. The time
Display
P
8
Display
1‐P
0 0 1‐
1 5 9...
0 6 0‐
0 5 9...
Advertenties
Hoofdstukken
Inhoudsopgave
