Advertenties
Beschikbare talen
Beschikbare talen
3.4. Overheat Protection:
To protect the service life of the machine, the machine has overheat protection in heating mode. During
the protection period, the compressor and the lower motor will stop operation and will automatically
return to normal heating state after the temperature of the machine recovers.
3.5
Protection Function of the Compressor
To increase the service life of the compressor, it has a 3-minute delay booting protection function after
the compressor is turned off.
Installation and adjustment
1.Installation：
Warning: before using the mobile air conditioning, keep it upright for at least two hours.
The air conditioning can be easily moved in the room. In the moving process, ensure that the air conditioning is
in the upright position and the air conditioning should be placed on a flat surface. Do not install and use the
air conditioning in the bathroom or other humid environments.
1.1 Install the heat pipe assembly (as show in Fig.1）
1) take out the outer connector assembly and the exhaust pipe assembly, and remove the plastic bags;
2) insert the heat pipe assembly (the end of the exhaust joint) into the back panel vent slot (push to the
left) and complete the assembly (as shown in figure 1).
1.2 Installation of window sealing plate components
Half open the window，and mount the window sealing plate assembly to the window (as shown in Fig.2 and
Fig.3).Components can be placed in horizontal and vertical direction.
Pull various components of the window sealing plate assembly open, adjust their opening distance to bring both
ends of the assembly into contact with the window frame, and fix various components of the assembly.1.2 Install
the window sealing plate assembly
Notes: 1）the flat end of the exhaust pipe joints must be snapped into place.
2)The pipe cannot be distorted nor has substantial turning (greater than 45°). Keep the ventilation of the
exhaust pipe not blocked.
Figure 2
26
Figure 1
Figure 3
Advertenties
Hoofdstukken
Probleemoplossen
