Decommissioning The Product; To Replace The Charging Cable - Webasto Pure Bedienings- En Montagehandleiding
Verberg thumbnails
Zie ook voor Pure:
- Bedieningshandleiding (13 pagina's) ,
- Bedienings- en installatiehandleiding (10 pagina's) ,
- Bedienings- en montagehandleiding (11 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Set key-operated switch from OFF to ON:
X
X
– "Dim LED indicator" function activated.
The LED indicator changes to blue and dims in several
stages from maximum to minimum, in 3 second intervals.
After reaching the lowest dim level the LED indicator swit-
ches back to maximum.
If the key-operated switch setting is not changed
from ON to OFF within 180 seconds, the original dim
level will remain unchanged and the programming
mode will be deactivated.
Set key-operated switch from ON to OFF:
X
X
– Dim level is selected.
If the key-operated switch setting is not changed further
within 60 seconds, the selected dim level will be saved and
programming mode deactivated.
Set key-operated switch back from OFF to ON to switch
X
X
to standby mode.
9.3 Deactivate charging current limit (option 2)
The charging current limit is only activated in the
factory for a 22 kW variant.
The charging current is only limited to 20 A for
1-phase charging.
The charging current limit may only be deactivated
in compliance with country-specific regulations and
standards.
X
3
Programming mode activated
The LED indicator flashes white in the following sequence
once: 0.5 s OFF;
0.5 s ON;
0.5 s OFF;
0.5 s ON;
After a three second pause the LED indicator switches to
yellow for one second:
Set key-operated switch from OFF to ON:
X
X
– Activate "charging current limit" function.
The current setting is indicated in colour by the LED:
Charging current limit activated = purple
Charging current limit deactivated = light blue
Webasto Pure
If the key-operated switch setting is not changed
from ON to OFF within 60 seconds, the original
setting will remain unchanged and the programming
mode will be deactivated.
Set key-operated switch from ON to OFF:
X
X
X
3
Charging current limit activated:
– The 20 A limit is deactivated and the charging station
is configured to the maximum current value (see type
plate). The LED indicator changes to light blue.
X
3
Charging current limit deactivated:
– The 20 A limit is activated. The LED indicator changes
to purple.
When the key-operated switch setting is not changed
further within 60 seconds, the selected setting will be saved
and programming mode deactivated.
Set key-operated switch back from OFF to ON to switch
X
X
to standby mode.
10 Decommissioning the product
A decomissioning shall be carried out only by an authorised
electrician.
Disconnect the power supply.
X
X
Electrically disconnect the charging station.
X
X
Disposal: see chapter 12.
X
X
11 Maintenance, cleaning, repair
11.1 Maintenance
Have maintenance carried out only by an authorised electri-
cian in accordance with local requirements.
11.2 Cleaning
DANGER
High voltages
Danger of fatal electric shock.
Never clean the charging station with a high-pressure
cleaner or similar device.
Clean the installation only with a dry cloth. Do not use
X
X
aggressive cleaning agents, wax or solvents.
11.3 Repair
Unauthorised repair of the charging station is not permit-
ted. In case of failure, the complete charging station must
be replaced.
Webasto Thermo & Comfort SE reserves the exclusive right
to perform repairs to the charging station.
The only repair to the charging station that is permitted
is to have the charging cable replaced by an authorised
electrician.
11.4 To replace the charging cable
DANGER
Hazardous voltages in the device
Danger of fatal electric shock.
The charging cable of the Webasto Pure must only
X
X
be replaced by an authorised electrician.
Before carrying out any work on the charging
X
X
station, switch off the power supply to the
charging station and secure to prevent restart
Make sure that the electrical connections are
X
X
safely isolated from the power supply.
Do not leave the charging station unattended with
X
X
the cover open.
Only use original Webasto spare parts.
Refer to the Webasto online shop for part numbers.
www.webasto-charging.com
Switch off and secure the power supply to the charging
X
X
station.
Remove cover of the connection terminals (Fig. 03).
X
X
Disconnect the electrical supply cable.
X
X
Remove the screws and washers at the bottom.
X
X
Detach the charging station from the mounting frame.
X
X
Remove cable clamp of the charging cable (Fig. 12; 1).
X
X
Disconnect PE conductor (Fig. 12: PE).
X
X
Open the maintenance flap on the back of the charging
X
X
station. (Fig. 13, 6). The cover is sealed.
Disconnect the remaining wires of the charging cable
X
X
(Fig. 13; 1-5).
Replace the charging cable.
X
X
9
Advertenties
Inhoudsopgave
