Technical Data; Declaration Of Conformity With The Product Standards - Webasto Pure Bedienings- En Montagehandleiding
Verberg thumbnails
Zie ook voor Pure:
- Bedieningshandleiding (13 pagina's) ,
- Bedienings- en installatiehandleiding (10 pagina's) ,
- Bedienings- en montagehandleiding (11 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Assemble and mount the charger in reverse order. To
X
X
maintain the IP 54 protection class, make sure that the
O-ring is fitted correctly.
Switch on the power supply to the charging station.
X
X
Make sure that the charging station successfully
X
X
completes the self-test to ensure its functionality.
12 Disposal
The symbol of the crossed-out waste bin indicates
that this electrical/electronic device must not be
disposed of in household waste at the end of its
service life. Dispose of the device free of charge
at a local collection point for electrical/electronic
devices. Addressed can be obtained from your city or
local authority. Separate collection of electrical and
electronic devices enables re-use, material recycling
or other forms of re-utilisation of waste equipment
while also avoiding the negative effects of hazardous
substances which may be contained in the devices on
the environment and for human health.
WEEE Reg No: DE 17725267
Dispose of packaging in corresponding recycling
X
X
container in accordance with national regulations.
10
13 Annex
13.1 Technical data
Data
Rated voltage
230/400 VAC
Rated current
16 or 32 A AC
Supply frequency
50 Hz
Overvoltage category
III as per EN 60664
Protection class
I
IP-protection class
IP54 in accordance with DIN
EN 60529 (VDE 0470-1) (the
IP code denotes the scope of
protection a housing offers in
terms of contact and foreign
objects as well as moisture/
water.)
Mechanical protection
IK 08 (the IK code denotes the
class
protection class offered by an
enclosure to external mechani-
cal impacts)
Residual direct current
6 mA RDC-MD
monitoring device (inte-
RDC to protect the installation
grated)
side RDC against faulty DC
currents.
Power supply conductor
Depending on the cable and
cross section
type of installation, the mini-
mum cable cross-section for a
standard installation is:
– 6 mm² (for 16 A)
– 10 mm² (for 32 A).
Charging cable with
According to EN 62196-1 and
charging coupling
EN 62196-2
Mains connection
Connection cable:
■
■
terminal
rigid (min.-max.) 2.5-
10 mm²
■
■
flexible (min.-max.) 2.5-
10 mm²
■
■
flexible (min.-max.) with
wire end ferrule 2.5-10 mm²
Output voltage
230/400 VAC
Data
Max. charging power
11 kW or 22 kW (depending
on factory configuration)
Operating temperature
-25 to +55 °C
range
Storage temperature
-25 to +80 °C
range
Indicator
LED element
Lock
Key-operated switch set to
start charging
Altitude
Max. 3000 m above sea level
Permissible relative
5% up to 95% Non-conden-
humidity
sing
Weight
11 kW version: 4.6 kg
(all parts included in the
22 kW version: 5.6 kg
scope of delivery)
Dimensions
See Fig. 10
13.2 Declaration of Conformity with the product
standards
The Webasto Pure was developed, manufactured, tested
and supplied in accordance with the relevant directives,
regulations and standards for safety, EMC and environmen-
tal compatibility.
Webasto declares that the product Webasto Pure is ma-
nufactured and delivered in accordance with the following
directives and regulations:
– 2014 /35/EU Low Voltage Directive
– 2014/30/EU EMC Directive
– 2011/65/EU RoHS Directive
– 2001/95/EG Product Safety Directive
– 2012/19/EU Waste Electrical and Electronic Equipment
Directive
– 1907/2006 REACH regulation
The complete CE Declaration of Conformity can be found in
the download area under https://webasto-charging.com/.
See Fig. 02 QR code for documentation.
Webasto Pure
Advertenties
Inhoudsopgave
