Advertenties
Beschikbare talen
Beschikbare talen
Scheduling
Heating hot water setting
To access the heating settings, press the
OK button.
Turn the knob and select:
- Complete menu
Press the OK button.
Turn the knob and select:
- CH settings
Press the OK button.
To set the fl ow temperature, turn the
knob and select:
- CH Setpoint temperature
Press the OK button.
The display screen shows:
- T set Z1
- T set Z2
Turn the knob and select:
- T set Z1
Press the OK button.
Turn the knob and set the fl ow temper-
ature for the selected zone.
Press the OK button to confi rm.
Repeat the above procedure to set the
fl ow temperature for the other zones, if
applicable.
Press the OK button to confi rm.
Turn the knob and select:
- CH mode
(only in HP systems)
Press the OK button.
Turn the knob and set the operating
mode of the heating elements:
- Green (excludes the use of heating ele-
ments)
- Standard (sets the normal operation of
the heating circuit)
Press the OK button.
26 / GB
Turn the knob and select:
- Automatic Summer / winter (allows
the activation of the heating de-
mand, when the outdoor temperatu-
re drops below the temperature set
by the parameter "Limit temp. Winter
/ summer auto" setting a time delay
on the switching with the parameter
"Summer / Winter switching delay", or
the interruption of the heat demand
when the outside temperature rises
above the set temperature).
- Zone1
- (Start up the function for zone 1)
(attiva la funzione per la zona1)
- Limit temp. summer / winter auto.
Z1 (External temperature switching
threshold for the activation / deacti-
vation of the heat demand)
- Switching delay summer / winter Z1
(Switching delay for the activation
/ deactivation of the heat demand
when the outside temperature get to
the set temperature).
Heating or cooling
To access the cooling mode settings,
press the OK button.
Turn the knob and select:
- Complete menu
Press the OK button.
Turn the knob and select:
- Cooling settings
Press the OK button.
To set the fl ow temperature, turn the
knob and select:
- Cooling Setpoint Temp
Press the OK button.
The display screen shows:
- T set Z1
- T set Z2
Turn the knob and select:
- T set Z1
Press the OK button.
Turn the knob and set the fl ow temper-
ature for the selected zone.
Press the OK button to confi rm.
Repeat the above procedure to set the
fl ow temperature for the other zones, if
applicable.
Press the back button "
" twice
Advertenties
