Turbo heating
To heat the room more quickly, set the
temperature control
level switch
to "3" .
[
2 ]
Press the heating fan switch
"I" to switch on the heating fan . An indicator
in the heating fan switch
Hot air will be blown through the heating
fan
.
[
5 ]
To switch off the heating fan
heating fan switch
Using the temperature control
product to the desired temperature .
Switch off the product
Press the heating fan switch
"0" to switch off the heating fan
Turn the temperature control
heat level switch
2 ]
[
Remove the mains plug from the mains
socket .
Frost protection function
The frost protection function
automatically controls the product to
keep the room temperature above
7 °C, steps are as follows:
Connect the product to an earthed mains
socket protected by a residual current circuit
breaker .
to . and the heat
3 ]
[
to position
4 ]
[
will light up .
4 ]
[
, press the
5 ]
[
to "0" position .
[
4 ]
to set the
3 ]
[
to position
4 ]
[
.
5 ]
[
to and the
[
3 ]
to "0" .
Switch on the product by setting the heat
level switch
to either "1", "2" or "3" and
2 ]
[
by setting the temperature control
The product switches on when the room
temperature is approx . 7 °C . As soon as
the room temperature is above 7 °C, the
product automatically switches off again .
NOTE: The product will switch itself on and
off automatically to maintain a temperature
higher than 7 °C .
Use the heating fan only
To use the heating fan
product, steps are as follows.
Connect the product to an earthed mains
socket protected by a residual current circuit
breaker .
Press the heating fan switch
"I" to switch on the heating fan
indicator in the heating fan switch
light up . Hot air will be blown through the
heating fan
.
5 ]
[
To switch off the heating fan
heating fan switch
NOTE: The heating fan works
independently from the power indicator
heat level switch
2 ]
[
control
.
[
3 ]
to .
[
3 ]
only on the
5 ]
[
to position
4 ]
[
. An
5 ]
[
will
[
4 ]
, press the
5 ]
[
to "0" position .
4 ]
[
1 ]
[
and temperature
GB/IE
,
25