Advertenties
Beschikbare talen
Beschikbare talen
Requirements:
•
Enabled operating mode "S
•
Terminators enabled at both ends of the connection – in the NTBA and in the PBX on
the external S
port in question
0
operating mode "S
external"
0
If the NTBA only has a slight distance to the
PBX, make a direct connection via the RJ45
socket (cable in the scope of delivery).
If the NTBA has a greater distance to the
PBX, then a cable must be laid fixed on the
terminal clamps of the external S
Network Provider at the External Analogue Port
Warning: Voltages that run through the connection socket of the network provider can
cause life-threatening electric shocks.
• Do not connect the PBX until the casing on the connection socket of the network
provider is closed again.
Connection possibilities:
•
Public analogue telephone network across Europe
•
Analogue GSM gateway
If the analogue connection has a greater distance to the
PBX, a cable with a wall socket at the terminal clamps of
the external analogue port must be laid fixed. Connect
the devices with the RJ-11/RJ-11 connection cable
included in the scope of delivery. Within Germany, you
additionally require the RJ-11/TAE-F adapter.
Internet and VoIP Terminals as well as PC and printer at the Ethernet Port
Connection possibilities:
•
PC
•
Printer
COMpact 5200/5200R/5500R - Instructions V03 03/2019
external" on the S
0
0
port.
0
port in question
terminators enabled
NTBA
external analogue port
RJ-11 wall socket
Installation
external S
port
0
53
Advertenties
