Advertenties
Beschikbare talen
Beschikbare talen
5.4 Operation using the Bluetooth
remote control
If Bluetooth mesh receivers and the Bluetooth remote control
have been set up and taught, the Bluetooth remote control
can be used to control the connected LED modules. On deliv-
ery, the Bluetooth mesh receivers included in the set and the
enclosed Bluetooth remote control have already been taught.
Switching on and off using the Bluetooth remote
control
Option 1: Pressing the
button switches all LED modules
connected to the selected group of Bluetooth mesh receivers
on or off.
Option 2: If the LED modules in a group are switched off, the
entire group is switched on by pressing the corresponding
button (1–4).
Adjusting the brightness
The + and - buttons are used to adjust the brightness of the
Bluetooth mesh receivers in the selected group.
1. To increase the brightness, press the + button.
2. To reduce the brightness, press the - button.
Adjusting the colour temperature (RGB+W receivers
only)
1. Press the
button.
> The signal lamp on the Bluetooth remote control flash-
es evenly. You can set the colour temperature.
38
Advertenties
